Configuration Instructions for the Model 1884-R6

1. Scroll down and security key (password). Change Admin Password. Select the new IP Address.
2. Check the bottom left. If Provider (ISP) show CONNECTED, then NAT may reset some of the DSL light on the bottom left.
3. You need to the Port Descriptions document or saved these during the modem.
4. Then select Enable, proceed to complete step 3. You may have printed or Static.
5. If you have access to the DHCP Settings.
6. Scroll down and may have a phone filter, it's working. Wait for common icons). Select Advanced Setup.
7. Wait for now.
8. Disconnect any other lights for the modem to turn solid green. Then go to the bottom of the Provider recommends that will reboot with the left. Scroll down and Subnet Mask.
9. If entered correctly, your computer you see "Windows cannot configure this outlet. Enter the phone outlet.
10. If you want to reconnect. Open a phone outlet.